Time to populate your boards!  Get the solder and accessories you need to make that happen. Check product details for compatibility information.

!
V1000039

Voltera Solder Paste Cartridge Lead Free

Fed up with ordering multiple stencils in between board iterations?

Just snap on the RoHS Sn42/Bi57.6/Ag0.4 solder paste cartridge and the V-­One will dispense solder paste onto the pads of your board. Solder paste can be dispensed onto your V­-One printed boards, or pre­fabricated circuit boards.

Each cartridge prints approximately 11,000 0603 pads.

Cartridges must be kept refrigerated, and have a shelf life of 6 months. The MSDS can be found here.

1 x 2ml cartridge

V1000037

Voltera Solder Paste Cartridge with Lead

*Not compatible with Voltera ink*

While the standard Voltera solder does work on factory-fabbed PCBs, this alloy has superior performance on boards with a lead-based HASL finish.  This allows you to easily paste, assemble, and reflow your prefabbed boards.

Particle size: T4

Reflow: 240C until fully melted

Each cartridge prints approximately 11,000 0603 pads.

Cartridges must be kept refrigerated, and have a shelf life of 6 months.

1 x 2mL cartridge

V000027

Voltera Solderwire Lead Free

Done printing? Let’s add some components! Just be sure to use the Voltera recommended solder wire and plenty of flux to ensure a strong solder joint. We’ve chemically tested it to be most compatible with our nanoparticle ink.

QPF600-S8

Rework Gel 10 cc

10% korting vanaf 10 stuks
  • Rework-gel in spuitje 10 cc
  • Compleet met plunger en naaldje
  • Licht harshoudend vloeimiddel, voor algemene toepassingen,
  • Eenvoudig te reinigen residu met Flux-Off en IPA